We
are equipped with all the necessary equipments
required for the rubber lining and its testing
such as.
Sand
blasting equipments and compressors
Mixing
& testing equipments.
Three
autoclave as under
1.
4.0
mtr Dia x 7 mtr length. (4000 mm x 7000
mm)
2.
1.5
mtr Dia x 3 mtr length. (1500 mm x 3000
mm)
3.
½
mtr Dia x 1 mtr length. (500 mm x 1000 mm)
Overhead
crane facilities for loading & uploading.
RUBBERLINING
We
have qualified and experienced Rubber Technologist to
design the rubber compound desire to clients specifications.
Our
unit is Processing practically all polymers like Natural,
Neoprene, Nitrile, EPDM, Hypalon, etc., under well experience
Rubber Technologist.
RUBBERLININING
MACHINERY
Our
Rubber lining unit is equipped with following Machineries
to Satisfy by quality work to our Valued customer.
One
Nos. of Mixing mill 16” x 42”.
Two
Rolls doubling Machining to increase the length
& finishing of the rubber Sheet to minimize
the joints.
Largest
autoclave in Ahmedabad having dia 4 mtr and length
7, to offer best adhesion between
metal to rubber.
Sand
blasting unit to make surface of metal rust &
oil free to get maximum mechanical & chemical
adhesion.
450kgs
Capacity Boiler.
Hardness
tester and Spark tester to offer rubber lining
defect free.
Loading
& unloading facilities up to 10 tones.
SURFACE
PREPARATION
After
sandblasting the surface is to be clean with
solvent to have dust free surface, after that
three coat of adhesive is to be applied one
after another to get correct thickness of adhesive
coat for getting best chemical adhesion.
AUTOCLAVE
VULCANISATION
Three
autoclave as under.
4.o
mtr Dia x 7 mtr length. (4000mm x 7000mm)
1.5
mtr Dia x 3 mtr length (1500mm x 3000mm)
½
mtr Dia x 1 mtr length (500mm x 1000mm)
QUALITY
ASSURANCE
We
have got team of qualified engineers to
have international inspection during process
of Rubber lining and for finish products.
SERVICES
The
Patel Fibre's technical Depertment is maintained
to provide you with assistance and advice on any
problem of acid or alkali - proof construction.
Write your service conditions to obtain prompt
recommendations and design suggestions. No obligations
of course.
