| PFC
EPOXY cements are available in three component
system the solution, the catalyst and the powder.
The catalyst is added to about 10 percent on
the weight of solution. The powders are available
in various aggregate combinations depending
on environmental requirements and is added from
3 to 6 times the solution. After adding the
catalyst or the hardner to the solution add
the powder slowly while stirring to make even
and uniform paste. |
| |
| Technical
Data |
| Product |
PFC
- Epoxy |
| Ratio
:- Powder : Solution |
5
: 1 |
| Colour |
Off
White |
Compressive
Strength (kg/cm2)
|
500 |
| Working
time. Min at 27°C+
2°C(mins.) |
20 |
| Initial
Time. Min at 27°C+
2°C(mins.) |
6
hrs |
| Final
Setting Time. Min at 27°C+
2°C(mins.) |
10
to 12 hrs |
| Flexural
Strength (kg/cm2) |
150 |
| Bond
Strength (kg/cm2) |
10 |
| Water
Absorption (Max %) |
01 |
| Temperature
Resistant (Max °C) |
90 |
| Self
Life @ 27°C ** |
3
month |
|
|
|
 |
Ratio
will be depending on Temp, working condition
& workman. |
|
Setting
time depend upon temp humidity and ratio. |
|
Prepare
sufficient quantity of mortar which can
be utilized in 20 minute and remove mortar
from Pan before another batch is mixed. |
| |
|
| |
| Packing |
Resin
20 kg. (P.Drum)
Powder 40kgs. (P.Beg)
Catalist 20kg (P. Drum) |
|
OUR
MOTTO IS QUALITY WORK & SATISFACTION
TO OUR CLIENTS. |
| |
|
